Wipe excess dirt from fabric with a clean, dry cloth, bristle brush, or sponge. Gently rub into affected area. After a few seconds, wipe once more with a clean, damp cloth and air dry.
Product Care & Cleaning
We use the best in materials to line our luggage and travel bags. All materials are specially treated to repel moisture and resist permanent stains, as well as make any required cleaning simple.This page will provide information on how to effectively clean and care for the materials used in your Tomcruiser product, and ensure its overall longevity.
CURV®
CURV is a self-reinforced thermoplastic composite that provides superior impact resistance and stiffness.
Using a dry, non-abrasive cloth and cleaning spray, thoroughly wipe the exterior surface. Clean the entire panel, not just the smeared area, for optimal results. Fabric lining should not be cleaned with these cleaners.
*Note: When using any commercial cleaning product, follow the manufacturer’s directions carefully.
Tweed Fabric
Tweed fabric is treated to repel water, dirt and stains, which makes cleaning easy. Clean with mild soap and water using a nylon-bristled brush. For best results, clean the entire panel evenly, not just the affected area. Do not saturate the fabric. Stubborn stains may be treated with Simple Green®, Fantastik®, Woolite®, or 409®.
Foaming upholstery cleaners made for wool-nylon blend fabrics also work well. After your piece has been cleaned, spray the fabric with Scotchgard® to restore its water and stain resistance properties. These cleaners should not be used on leather trim.
*Note: When using any commercial cleaning product, follow the manufacturer’s directions carefully.
Ballistic Nylon
A high-quality leather product. Any grain, lines, marks or slight differences in color are natural signs impressed on the surface of the hide, and are not detrimental to its quality. To clean, regularly wipe with a soft, slightly moist cloth. Only use special leather care products and test them on a less visible area before commencing cleaning. Never use excessive quantities, and do not rub hard. Remove any moisture immediately with a soft cloth. Always store leather in a cool, dry, well ventilated location and protect from heat and direct sunlight.
Belting Leather
A high-quality leather product. Any grain, lines, marks or slight differences in color are natural signs impressed on the surface of the hide, and are not detrimental to its quality. To clean, regularly wipe clean with a soft, slightly moist cloth. Only use special leather care products and test them on a less visible part. Never use excessive quantities, and do not rub hard. Remove any moisture immediately with a soft cloth. Always store leather in a cool, dry, well ventilated location and protect from heat and direct sunlight.
Full Grain Leather
Clean this leather with warm water and a soft cloth. For best results, clean the entire panel evenly, not just the affected area. Do not saturate. Allow to dry thoroughly. We do not recommend using saddle soaps, commercial leather cleaners or preservatives. While these products will not harm the leather, they often contain wax or oil, which can darken the leather or cause it to permanently show water spots.
Polycarbonate
Wipe down the entire outside surface with Pledge® Wipes or Pledge® spray and a non-abrasive dry cloth. For best results, clean the entire panel, not just the smudged area. These cleaners should not be used on leather trim®.
*Note: When using any commercial product, follow the manufacturer’s directions carefully.
